WLD sensing cable Type B 2 m for leak detection, thin design, without connecting cable - HW group 600912

An existing WLD zone often needs just a short extra section, for example under a newly installed cooling unit. The Type B sensing cable adds 2 m of coverage and reports a few drops at any point. It joins the zone through the same 2-pin locking connector used by Type A.

Benefits

• Detection along the full length: a few drops of conductive liquid anywhere on the 2 m trigger an alarm.
• Thinner than Type A: the smaller diameter dries faster, and the cable can be cleaned, dried and reused.
• Tolerant installation: no bend radius and no twist limit, stepping on or pressing the cable causes no false alarm, and it can run under door thresholds.
• Mix with Type A: both types can share one zone, up to 185 m per zone with extension cables.

Applications

• Extra section under A/C and cooling units in server rooms
• Liquid cooling with CDUs and quick disconnects
• Condensate lines and chillers
• Boiler rooms around pumps and valves

Compatibility

• Extends a WLD zone connected via AB connecting cable to HW group devices with a WLD zone input
• Can be combined with WLD sensing cable Type A in the same zone
• Ready-to-connect sets with connecting cable: 600918, 600919, 600920, 600921