Water leak sensing cable WLD-Sensing cable B, 10 m, Type B, connecting cable not included - HW group 600914

Spot sensors only see water once it reaches them. The WLD-Sensing cable B watches a continuous 10 m run under raised floors, next to cooling units or along pipework and reports just a few drops of conductive liquid to the connected WLD device.

Benefits

• Detection along the full length: Any point on the 10 m cable triggers the alarm, not just a single sensing spot.
• Easy to route: No minimum bend radius. The cable keeps working even when knotted or twisted.
• No false alarms from pressure: Stepping on it or pressing it within reasonable limits does not trigger an alarm, so it can run under door thresholds.
• Reusable: Clean, dry and reinstall after a leak. Type B has a smaller diameter than Type A and dries faster.
• Expandable: Same 2-pin locking connector as Type A, so both types can share one WLD zone. Non-sensing extension cables take a zone up to 185 m.

Applications

• Data centres: raised floors and spaces above suspended ceilings
• Server rooms and rack rows around cooling units and cable trays
• Liquid cooling: pipe runs below CDUs, manifolds and quick-disconnect couplings
• HVAC: air conditioners, chillers and condensate lines
• Boiler and plant rooms, basements, archives and warehouses

Compatibility

• Devices with a WLD zone input such as WLD2, SD-WLD, Sensor WLD Relay 1W-UNI, NB-WLD and WLD-ECHO
• Can be combined with WLD sensing cable Type A and WLD-Extension cable AB in the same zone