Straight bulkhead weld coupling, tube 28 L, socket 40 mm, phosphated steel without nut

In use, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is supplied with tube outside diameter 28 L and weld socket 40 mm. It is produced from phosphated steel, without nut and cutting ring.

Benefits

• The weld socket of 40 mm diameter is welded into the wall and carries the coupling.
• Tube 28 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 160 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 28 L outwards through the welded 40 mm socket.