Straight bulkhead weld coupling, tube 38 S, socket 60 mm, phosphated steel without nut

The bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is supplied with tube outside diameter 38 S and weld socket 60 mm. The article is made of phosphated steel, without nut and cutting ring.

Benefits

• The weld socket of 60 mm diameter is welded into the wall and carries the coupling.
• Tube 38 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 38 S outwards through the welded 60 mm socket.