Straight bulkhead weld coupling, tube 22 L, socket 36 mm, phosphated steel without nut

Once installed, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is supplied with tube outside diameter 22 L and weld socket 36 mm. It is produced from phosphated steel, without nut and cutting ring.

Benefits

• The weld socket of 36 mm diameter is welded into the wall and carries the coupling.
• Tube 22 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 160 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

In cabinet and machine housing construction the feed-through holds 160 bar and stays tight at the wall.