Straight bulkhead weld coupling, tube 8 L, socket 20 mm, NC clamping ring 1.4571

Once installed, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. The data sheet gives a working pressure of 315 bar. The stated figures are tube outside diameter 8 L and weld socket 20 mm.

Benefits

• The weld socket of 20 mm diameter is welded into the wall and carries the coupling.
• Tube 8 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 with an NC clamping ring sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 8 L outwards through the welded 20 mm socket.