Straight bulkhead weld coupling, tube 35 L, socket 50 mm, phosphated steel

As a bulkhead coupling the article takes the tube line through a wall and is welded in on the vessel side with its socket. The data sheet gives a working pressure of 160 bar. Material phosphated steel is listed for this version.

Benefits

• The weld socket of 50 mm diameter is welded into the wall and carries the coupling.
• Tube 35 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 160 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 35 L outwards through the welded 50 mm socket.