Straight bulkhead weld coupling, tube 12 L, socket 25 mm, phosphated steel

As a bulkhead coupling the article takes the tube line through a wall and is welded in on the vessel side with its socket. The data sheet gives a working pressure of 315 bar. This version is listed with tube outside diameter 12 L and weld socket 25 mm. Material phosphated steel is listed for this version.

Benefits

• The weld socket of 25 mm diameter is welded into the wall and carries the coupling.
• Tube 12 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 12 L outwards through the welded 25 mm socket.