Straight bulkhead weld coupling, tube 18 L, socket 32 mm, phosphated steel without nut

In use, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is supplied with tube outside diameter 18 L and weld socket 32 mm. It is produced from phosphated steel, without nut and cutting ring.

Benefits

• The weld socket of 32 mm diameter is welded into the wall and carries the coupling.
• Tube 18 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

In shipbuilding and vessel construction the version in phosphated steel, without nut and cutting ring joins two separate spaces without a removable wall seal.