Straight bulkhead weld coupling, tube 6 S, socket 20 mm, NC clamping ring 1.4571

In use, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is supplied with tube outside diameter 6 S and weld socket 20 mm. It is produced from stainless steel 1.4571 with an NC clamping ring.

Benefits

• The weld socket of 20 mm diameter is welded into the wall and carries the coupling.
• Tube 6 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 500 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 with an NC clamping ring sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 6 S outwards through the welded 20 mm socket.