Straight bulkhead weld coupling, tube 42 L, socket 60 mm, phosphated steel without nut

This bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. The data sheet gives a working pressure of 160 bar. The stated figures are tube outside diameter 42 L and weld socket 60 mm.

Benefits

• The weld socket of 60 mm diameter is welded into the wall and carries the coupling.
• Tube 42 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 160 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 42 L outwards through the welded 60 mm socket.