Straight bulkhead weld coupling, tube 10 L, socket 22 mm, phosphated steel without nut

As a bulkhead coupling the article takes the tube line through a wall and is welded in on the vessel side with its socket. Material phosphated steel, without nut and cutting ring is listed for this version. The article is listed with a working pressure of 315 bar.

Benefits

• The weld socket of 22 mm diameter is welded into the wall and carries the coupling.
• Tube 10 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

In cabinet and machine housing construction the feed-through holds 315 bar and stays tight at the wall.