Straight bulkhead weld coupling, tube 10 L, socket 22 mm, NC clamping ring 1.4571

In use, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is produced from stainless steel 1.4571 with an NC clamping ring. The data give tube outside diameter 10 L and weld socket 22 mm.

Benefits

• The weld socket of 22 mm diameter is welded into the wall and carries the coupling.
• Tube 10 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 with an NC clamping ring sets the corrosion protection and the temperature limit of the joint.

Applications

In cabinet and machine housing construction the feed-through holds 315 bar and stays tight at the wall.