Straight bulkhead weld coupling, tube 18 L, socket 32 mm, stainless steel 1.4571

Once installed, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is supplied with tube outside diameter 18 L and weld socket 32 mm. It is produced from stainless steel 1.4571.

Benefits

• The weld socket of 32 mm diameter is welded into the wall and carries the coupling.
• Tube 18 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 18 L outwards through the welded 32 mm socket.