Straight bulkhead weld coupling, tube 12 S, socket 28 mm, stainless steel 1.4571

Once installed, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. This version is listed with tube outside diameter 12 S and weld socket 28 mm. The stated figure is a working pressure of 630 bar.

Benefits

• The weld socket of 28 mm diameter is welded into the wall and carries the coupling.
• Tube 12 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 630 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 sets the corrosion protection and the temperature limit of the joint.

Technical data

Applications

In cabinet and machine housing construction the feed-through holds 630 bar and stays tight at the wall.