Straight bulkhead weld coupling, tube 15 L, socket 28 mm, NC clamping ring 1.4571

The bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. The data sheet gives a working pressure of 315 bar. The stated material is stainless steel 1.4571 with an NC clamping ring.

Benefits

• The weld socket of 28 mm diameter is welded into the wall and carries the coupling.
• Tube 15 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 with an NC clamping ring sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 15 L outwards through the welded 28 mm socket.