Straight bulkhead weld coupling, tube 6 S, socket 20 mm, stainless steel 1.4571

Once installed, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. The article is listed with a working pressure of 630 bar. Material stainless steel 1.4571 is listed for this version.

Benefits

• The weld socket of 20 mm diameter is welded into the wall and carries the coupling.
• Tube 6 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 630 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 sets the corrosion protection and the temperature limit of the joint.

Applications

In cabinet and machine housing construction the feed-through holds 630 bar and stays tight at the wall.