Straight bulkhead weld coupling, tube 15 L, socket 28 mm, phosphated steel without nut

Once installed, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is supplied with tube outside diameter 15 L and weld socket 28 mm. It is produced from phosphated steel, without nut and cutting ring.

Benefits

• The weld socket of 28 mm diameter is welded into the wall and carries the coupling.
• Tube 15 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 15 L outwards through the welded 28 mm socket.