Straight bulkhead weld coupling, tube 25 S, socket 45 mm, stainless steel 1.4571

In use, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. This version is listed with tube outside diameter 25 S and weld socket 45 mm. Its rating is a working pressure of 400 bar.

Benefits

• The weld socket of 45 mm diameter is welded into the wall and carries the coupling.
• Tube 25 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 400 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 sets the corrosion protection and the temperature limit of the joint.

Applications

In shipbuilding and vessel construction the version in stainless steel 1.4571 joins two separate spaces without a removable wall seal.