Did you know? 60° / 55°

NPT and BSPT have different flank angles, 60 against 55 degrees. They will screw together for a few turns and still not seal reliably.

Browse threaded fittings

Adjustable fittings

Adjustable L-type connectors, DKO

Adjustable L-type connectors take the line in a compact L shape from the cutting ring tube to a cone port sealed by an O-ring. Overall height stays lower than on the elbow version, orientation being secured by a counter nut. This group holds 91 items.

Tube along with cone sizes cover 6 L (M12x1,5) up to 35 L (M45x2), 6 S (M14x1,5) up to 38 S (M52x2), plus 42 L (M52x2). Material is zinc plated steel or stainless steel 1.4571, supplied complete or without nut plus ring.

91 items
1 manufacturer
Net prices plus VAT

View as Grid view List view

Show

per page

Buying guide

How to choose Adjustable L-type connectors, DKO

What matters when choosing: properties, comparison and typical applications.

Technical data

⚡L shape - the tube port stands at a right angle to the cone end, keeping the fitting short.

⚡Tube 6 L to 42 L - light series from 6 L through 15 L (M22x1,5) up to 42 L (M52x2), heavy series from 6 S up to 38 S (M52x2).

⚡Sealing cone with O-ring - the joint seals elastically, staying tight after repeated dismantling.

⚡Two materials - zinc plated steel as the rule, stainless steel 1.4571 for corrosive media, also as a version whose cone plus O-ring sit in 1.4571.

⚡Supply form - fully assembled, or as a body without nut plus ring when those parts already sit on the tube.

Applications

The L shape suits places offering little room behind the device: valve blocks inside cabinets, compact power units, vehicle bodies. The cone port allows a direct link to hose lines carrying a DKO nipple, so no extra adapter is needed. Sizes up to 42 L cover return lines of large cross section.