Adjustable L connector, tube 12 S, stainless steel 1.4571, no nut or ring

As a adjustable L connector the article turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. The data sheet gives a working pressure of 630 bar. This version is listed with tube stud 12 S and tube connection 12 S (M20x1.5). Material stainless steel 1.4571 is listed for this version. Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• The elbow can be set to any direction before it is locked, so tube 12 S (M20x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 12 S, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -20 to +200 °C, the limit is set by the O-ring and not by the body in stainless steel 1.4571.
• Tube connection 12 S (M20x1,5) through a cutting ring, the tube is held by both form and friction.

Applications

At the hydraulic pump tube 12 S (M20x1,5) is led away at a right angle and joined to tube stud 12 S with a soft seal.

Standards and conformity

The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.