Adjustable L connector, tube 10 L, stainless steel 1.4571, with sealing cone and O-ring

The adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. The article is listed with a working pressure of 315 bar. The stated figures are tube stud 10 L and tube connection 10 L (M16x1.5). This version is supplied with light series.

Benefits

• The elbow can be set to any direction before it is locked, so tube 10 L (M16x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 10 L, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -20 to +200 °C, the limit is set by the O-ring and not by the body in stainless steel 1.4571.
• Tube connection 10 L (M16x1,5) through a cutting ring, the tube is held by both form and friction.

Applications

In a control cabinet or power unit in stainless steel 1.4571 the adjustable corner saves the tube bend that would otherwise be needed and holds 315 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.