Adjustable L connector, tube 8 S, stainless steel 1.4571, with sealing cone and O-ring

Once installed, the adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. Material stainless steel 1.4571 is listed for this version. The data state a working pressure of 630 bar. Also stated are heavy series.

Benefits

• The elbow can be set to any direction before it is locked, so tube 8 S (M16x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 8 S, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -20 to +200 °C, the limit is set by the O-ring and not by the body in stainless steel 1.4571.
• Tube connection 8 S (M16x1,5) through a cutting ring, the tube is held by both form and friction.

Applications

Where a line of the heavy series is opened often, tightness is kept because the O-ring seals and not the metal face.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.