Adjustable L connector, tube 38 S, stainless steel 1.4571, with sealing cone and O-ring

Once installed, the adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. It is produced from stainless steel 1.4571. The data give tube stud 38 S and tube connection 38 S (M52x2). In addition the data give heavy series.

Benefits

• The elbow can be set to any direction before it is locked, so tube 38 S (M52x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 38 S, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 315 bar in the heavy series.
• Temperature range -20 to +200 °C, the limit is set by the O-ring and not by the body in stainless steel 1.4571.
• Tube connection 38 S (M52x2) through a cutting ring, the tube is held by both form and friction.

Technical data

Applications

Where a line of the heavy series is opened often, tightness is kept because the O-ring seals and not the metal face.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.