Adjustable L connector, tube 18 L, NC clamping ring 1.4571, with sealing cone and O-ring

The adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. In addition the sheet lists a temperature range of -20 to +200 °C. This version comes with tube stud 18 L and tube connection 18 L (M26x1.5). The version is listed with light series and clamping system NC clamping ring.

Benefits

• The elbow can be set to any direction before it is locked, so tube 18 L (M26x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 18 L, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -20 to +200 °C, the limit is set by the O-ring and not by the body in stainless steel 1.4571.
• Tube connection 18 L (M26x1,5) through a cutting ring, the tube is held by both form and friction.

Applications

Where a line of the light series is opened often, tightness is kept because the O-ring seals and not the metal face.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.