Adjustable L connector, tube 35 L, stainless steel 1.4571, with sealing cone and O-ring

In use, the adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. This version is listed with tube stud 35 L and tube connection 35 L (M45x2). Its rating is a working pressure of 160 bar. In addition the data give light series.

Benefits

• The elbow can be set to any direction before it is locked, so tube 35 L (M45x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 35 L, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C, the limit is set by the O-ring and not by the body in stainless steel 1.4571.
• Tube connection 35 L (M45x2) through a cutting ring, the tube is held by both form and friction.

Applications

Where a line of the light series is opened often, tightness is kept because the O-ring seals and not the metal face.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.