Adjustable L connector, tube 22 L, zinc-plated steel, no nut or ring

As a adjustable L connector the article turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. The article is listed with a working pressure of 160 bar. This version is listed with tube stud 22 L and tube connection 22 L (M30x2). Material zinc-plated steel is listed for this version. Also stated are light series and scope of delivery without nut and cutting ring.

Benefits

• The elbow can be set to any direction before it is locked, so tube 22 L (M30x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 22 L, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -35 to +100 °C, the limit is set by the O-ring and not by the body in zinc-plated steel.
• Tube connection 22 L (M30x2) through a cutting ring, the tube is held by both form and friction.

Applications

In a control cabinet or power unit in zinc-plated steel the adjustable corner saves the tube bend that would otherwise be needed and holds 160 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.