Adjustable L connector, tube 10 L, zinc-plated steel, with sealing cone and O-ring

In use, the adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. It is produced from zinc-plated steel. The data give tube stud 10 L and tube connection 10 L (M16x1.5). In addition the data give light series.

Benefits

• The elbow can be set to any direction before it is locked, so tube 10 L (M16x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 10 L, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -35 to +100 °C, the limit is set by the O-ring and not by the body in zinc-plated steel.
• Tube connection 10 L (M16x1,5) through a cutting ring, the tube is held by both form and friction.

Applications

In a control cabinet or power unit in zinc-plated steel the adjustable corner saves the tube bend that would otherwise be needed and holds 315 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.