Adjustable L connector, tube 6 L, zinc-plated steel, with sealing cone and O-ring

Once installed, the adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. The data also state a temperature range of -35 to +100 °C. Decisive for the selection is a working pressure of 315 bar. In addition the data give light series.

Benefits

• The elbow can be set to any direction before it is locked, so tube 6 L (M12x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 6 L, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -35 to +100 °C, the limit is set by the O-ring and not by the body in zinc-plated steel.
• Tube connection 6 L (M12x1,5) through a cutting ring, the tube is held by both form and friction.

Applications

At the hydraulic pump tube 6 L (M12x1,5) is led away at a right angle and joined to tube stud 6 L with a soft seal.

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.