Adjustable 45° connector, tube 38 S, stainless steel 1.4571, with sealing cone and O-ring

The adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. The article is listed with a working pressure of 315 bar. This version is listed with tube stud 38 S and tube connection 38 S (M52x2). The stated material is stainless steel 1.4571. This version is supplied with heavy series.

Benefits

• The 45 degree turn carries tube 38 S (M52x2) on even where a right angle would need too much room.
• The bend can be set to any direction before it is locked and is counter-locked afterwards.
• Sealing cone with an O-ring at tube stud 38 S for a soft joint that can be undone repeatedly.
• Working pressure up to 315 bar in the heavy series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

At a tube stud 38 S in stainless steel 1.4571 the coupling replaces two bends and holds 315 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.