Adjustable 45° connector, tube 12 L, zinc-plated steel, with sealing cone and O-ring

The adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. It is supplied with tube stud 12 L and tube connection 12 L (M18x1.5). The article is made of zinc-plated steel. The version is listed with light series.

Benefits

• The 45 degree turn carries tube 12 L (M18x1,5) on even where a right angle would need too much room.
• The bend can be set to any direction before it is locked and is counter-locked afterwards.
• Sealing cone with an O-ring at tube stud 12 L for a soft joint that can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.

Applications

Where two units are offset from one another the 45 degree bend spans the offset and takes tube 12 L (M18x1,5).

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.