Adjustable 45° connector, tube 22 L, zinc-plated steel, with sealing cone and O-ring

In use, the adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. The data also state a temperature range of -35 to +100 °C. This version comes with tube stud 22 L and tube connection 22 L (M30x2). In addition the data give light series.

Benefits

• The 45 degree turn carries tube 22 L (M30x2) on even where a right angle would need too much room.
• The bend can be set to any direction before it is locked and is counter-locked afterwards.
• Sealing cone with an O-ring at tube stud 22 L for a soft joint that can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.

Applications

Where two units are offset from one another the 45 degree bend spans the offset and takes tube 22 L (M30x2).

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.