Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
This adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. A key figure is a working pressure of 160 bar. Size stud 42 L, tube 42 L (M52x2), light series, without nut and cutting ring, material stainless steel 1.4571.
Adjustable 45° connector, tube 42 L, stainless steel 1.4571, no nut or ring
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€611.75
Item
FL-709381
Manufacturer no.
XEV 42 L ES
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.XEV 42 L ES
EAN4050571938048
Customs tariff number73071990
ConditionNew
Artikel
FL-709381
Frequently Bought Together
-
This Item:
€611.75
-
Adjustable 45° connector, tube 18 L, zinc-plated steel, no nut or ring
€19.94
-
Adjustable 45° connector, tube 35 L, stainless steel 1.4571, no nut or ring
€475.63
Total price
As a adjustable 45° connector the article turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. Material stainless steel 1.4571 is listed for this version. The data sheet gives a working pressure of 160 bar. Also stated are light series and scope of delivery without nut and cutting ring.
Benefits
- The 45 degree turn carries tube 42 L (M52x2) on even where a right angle would need too much room.
- The bend can be set to any direction before it is locked and is counter-locked afterwards.
- Sealing cone with an O-ring at tube stud 42 L for a soft joint that can be undone repeatedly.
- Working pressure up to 160 bar in the light series.
- Temperature range -20 to +200 °C for the body in stainless steel 1.4571.
Technical data
| Material designation | 1.4571, without nut and cutting ring |
|---|---|
| Series | light series |
| Tube stud size | 42 L |
| Tube diameter outside | 42 L (M52x2) |
| Working pressure [bar] | 160 |
| Temperature range [°C] | -20 to +200 |
| Scope of delivery | without nut and cutting ring |
| Body material | stainless steel 1.4571 |
Applications
Where two units are offset from one another the 45 degree bend spans the offset and takes tube 42 L (M52x2).
Standards and conformity
The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.
| Manufacturer | Fluidics equipment |
|---|---|
| Hersteller-Nr | XEV 42 L ES |
| EAN | 4050571938048 |
| Zolltarifnummer | 73071990 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | ohne Mutter & Schneidring, 1.4571 |
| Rohrdurchmesser (außen) | 42 L (M52x2) |
| Rohrstutzendurchmesser [mm] | 42 L |
| Series | leichte Baureihe |
| Temperaturbereich | -20-200 °C |
Customers Who Bought This Item Also Bought
