Adjustable 45° connector, tube 35 L, stainless steel 1.4571, with sealing cone and O-ring

This adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. This version comes with tube stud 35 L and tube connection 35 L (M45x2). A further figure is a temperature range of -20 to +200 °C. This version is supplied with light series.

Benefits

• The 45 degree turn carries tube 35 L (M45x2) on even where a right angle would need too much room.
• The bend can be set to any direction before it is locked and is counter-locked afterwards.
• Sealing cone with an O-ring at tube stud 35 L for a soft joint that can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

At a tube stud 35 L in stainless steel 1.4571 the coupling replaces two bends and holds 160 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.