Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
In service the adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. The decisive figure is a working pressure of 630 bar. Material stainless steel 1.4571, size stud 10 S, tube 10 S (M18x1.5), heavy series, without nut and cutting ring.
Adjustable 45° connector, tube 10 S, stainless steel 1.4571, no nut or ring
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€122.32
Item
FL-734199
Manufacturer no.
XEV 10 S ES
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.XEV 10 S ES
EAN4050571941116
Customs tariff number73071990
ConditionNew
Artikel
FL-734199
Frequently Bought Together
-
This Item:
€122.32
-
Adjustable 45° connector, tube 25 S, zinc-plated steel, no nut or ring
€43.40
-
Adjustable 45° connector, tube 18 L, zinc-plated steel, with sealing cone and O-ring
€25.67
Total price
This adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. The article is listed with a working pressure of 630 bar. The stated material is stainless steel 1.4571. This version is supplied with heavy series and scope of delivery without nut and cutting ring.
Benefits
- The 45 degree turn carries tube 10 S (M18x1,5) on even where a right angle would need too much room.
- The bend can be set to any direction before it is locked and is counter-locked afterwards.
- Sealing cone with an O-ring at tube stud 10 S for a soft joint that can be undone repeatedly.
- Working pressure up to 630 bar in the heavy series.
- Temperature range -20 to +200 °C for the body in stainless steel 1.4571.
Technical data
| Material designation | 1.4571, without nut and cutting ring |
|---|---|
| Series | heavy series |
| Tube stud size | 10 S |
| Tube diameter outside | 10 S (M18x1.5) |
| Working pressure [bar] | 630 |
| Temperature range [°C] | -20 to +200 |
| Scope of delivery | without nut and cutting ring |
| Body material | stainless steel 1.4571 |
Applications
At a tube stud 10 S in stainless steel 1.4571 the coupling replaces two bends and holds 630 bar.
Standards and conformity
The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.
| Manufacturer | Fluidics equipment |
|---|---|
| Hersteller-Nr | XEV 10 S ES |
| EAN | 4050571941116 |
| Zolltarifnummer | 73071990 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | ohne Mutter & Schneidring, 1.4571 |
| Rohrdurchmesser (außen) | 10 S (M18x1,5) |
| Rohrstutzendurchmesser [mm] | 10 S |
| Series | schwere Baureihe |
| Temperaturbereich | -20-200 °C |
Customers Who Bought This Item Also Bought
