Adjustable 45° connector, tube 30 S, stainless steel 1.4571, with sealing cone and O-ring

As a adjustable 45° connector the article turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. The data state a working pressure of 400 bar. Material stainless steel 1.4571 is listed for this version. Also stated are heavy series.

Benefits

• The 45 degree turn carries tube 30 S (M42x2) on even where a right angle would need too much room.
• The bend can be set to any direction before it is locked and is counter-locked afterwards.
• Sealing cone with an O-ring at tube stud 30 S for a soft joint that can be undone repeatedly.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

In pipework of the heavy series the bending radius of the tube is left alone because the angle sits in the coupling.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.