Non-restricting swivel elbow, M 14x1.5, tube 8 S, zinc-plated steel, no nut or ring

The swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The stated material is zinc-plated steel. The data sheet gives a working pressure of 400 bar. This version is supplied with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 8 S (M16x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 8 S (M16x1,5) is kept right through the swivel bend.
• Male stud thread M 14x1.5 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

On hydraulic power units the swivel coupling sits wherever tube 8 S (M16x1,5) leaves thread M 14x1.5 in a direction that is only fixed during installation.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.