Non-restricting swivel elbow, M 42x2, tube 30 S, stainless steel 1.4571

The swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The article is listed with a working pressure of 250 bar. This version is listed with male stud thread M 42x2 and tube connection 30 S (M42x2). The stated material is stainless steel 1.4571. This version is supplied with heavy series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 30 S (M42x2) can be laid without stress.
• Non-restricting bore, the cross section of 30 S (M42x2) is kept right through the swivel bend.
• Male stud thread M 42x2 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 250 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.

Applications

In machine building the non-restricting version in stainless steel 1.4571 replaces the bend that would otherwise be needed and holds 250 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.