Non-restricting swivel elbow, M 10x1, tube 8 LL, stainless steel 1.4571, no nut or ring

In use, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. It is produced from stainless steel 1.4571. The data give male stud thread M 10x1 and tube connection 8 LL (M12x1). In addition the data give very light series and scope of delivery without nut and cutting ring.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 8 LL (M12x1) can be laid without stress.
• Non-restricting bore, the cross section of 8 LL (M12x1) is kept right through the swivel bend.
• Male stud thread M 10x1 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 100 bar in the very light series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.

Applications

In machine building the non-restricting version in stainless steel 1.4571 replaces the bend that would otherwise be needed and holds 100 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.