Non-restricting swivel elbow, M 10x1, tube 6 L, zinc-plated steel

Once installed, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The data also state a temperature range of -40 to +120 °C. Decisive for the selection is a working pressure of 315 bar. In addition the data give light series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 6 L (M12x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 6 L (M12x1,5) is kept right through the swivel bend.
• Male stud thread M 10x1 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 315 bar in the light series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

On hydraulic power units the swivel coupling sits wherever tube 6 L (M12x1,5) leaves thread M 10x1 in a direction that is only fixed during installation.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.