Non-restricting swivel elbow, M 20x1.5, tube 14 S, zinc-plated steel

In use, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. It is produced from zinc-plated steel. The data give male stud thread M 20x1.5 and tube connection 14 S (M22x1.5). In addition the data give heavy series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 14 S (M22x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 14 S (M22x1,5) is kept right through the swivel bend.
• Male stud thread M 20x1.5 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

Where space at the device is tight, tube 14 S (M22x1,5) is guided past the wall through the swivel bend of the heavy series.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.