Non-restricting swivel elbow, M 42x2, tube 35 L, zinc-plated steel

Once installed, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. This version is listed with male stud thread M 42x2 and tube connection 35 L (M45x2). Decisive for the selection is a working pressure of 160 bar. The version is listed with light series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 35 L (M45x2) can be laid without stress.
• Non-restricting bore, the cross section of 35 L (M45x2) is kept right through the swivel bend.
• Male stud thread M 42x2 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 160 bar in the light series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

On hydraulic power units the swivel coupling sits wherever tube 35 L (M45x2) leaves thread M 42x2 in a direction that is only fixed during installation.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.