Non-restricting swivel elbow, M 14x1.5, tube 10 L, zinc-plated steel

As a swivel elbow coupling the article takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The data state a working pressure of 315 bar. The stated figures are male stud thread M 14x1.5 and tube connection 10 L (M16x1.5). Also stated are light series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 10 L (M16x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 10 L (M16x1,5) is kept right through the swivel bend.
• Male stud thread M 14x1.5 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 315 bar in the light series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

Where space at the device is tight, tube 10 L (M16x1,5) is guided past the wall through the swivel bend of the light series.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.