Non-restricting swivel elbow, M 48x2, tube 42 L, stainless steel 1.4571

The swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The data state a working pressure of 160 bar. The stated material is stainless steel 1.4571. This version is supplied with light series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 42 L (M52x2) can be laid without stress.
• Non-restricting bore, the cross section of 42 L (M52x2) is kept right through the swivel bend.
• Male stud thread M 48x2 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 160 bar in the light series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.

Applications

Where space at the device is tight, tube 42 L (M52x2) is guided past the wall through the swivel bend of the light series.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.