Non-restricting swivel elbow, M 16x1.5, tube 10 S, stainless steel 1.4571

In use, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The data also state a temperature range of -60 to +400 °C. This version comes with male stud thread M 16x1.5 and tube connection 10 S (M18x1.5). In addition the data give heavy series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 10 S (M18x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 10 S (M18x1,5) is kept right through the swivel bend.
• Male stud thread M 16x1.5 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.

Applications

Where space at the device is tight, tube 10 S (M18x1,5) is guided past the wall through the swivel bend of the heavy series.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.