Non-restricting swivel elbow, M 33x2, tube 28 L, zinc-plated steel

Once installed, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. It is supplied with male stud thread M 33x2 and tube connection 28 L (M36x2). It is produced from zinc-plated steel. In addition the data give light series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 28 L (M36x2) can be laid without stress.
• Non-restricting bore, the cross section of 28 L (M36x2) is kept right through the swivel bend.
• Male stud thread M 33x2 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 160 bar in the light series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

In machine building the non-restricting version in zinc-plated steel replaces the bend that would otherwise be needed and holds 160 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.