Non-restricting swivel elbow, M 33x2, tube 25 S, zinc-plated steel

Once installed, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. In addition the sheet lists a temperature range of -40 to +120 °C. Its rating is a working pressure of 250 bar. The version is listed with heavy series.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 25 S (M36x2) can be laid without stress.
• Non-restricting bore, the cross section of 25 S (M36x2) is kept right through the swivel bend.
• Male stud thread M 33x2 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 250 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

Where space at the device is tight, tube 25 S (M36x2) is guided past the wall through the swivel bend of the heavy series.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.