Non-restricting swivel elbow, M 12x1.5, tube 8 L, NC clamping ring 1.4571

As a swivel elbow coupling the article takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The data state a working pressure of 315 bar. This version is listed with male stud thread M 12x1.5 and tube connection 8 L (M14x1.5). Material stainless steel 1.4571 is listed for this version. Also stated are light series and clamping system NC clamping ring.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 8 L (M14x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 8 L (M14x1,5) is kept right through the swivel bend.
• Male stud thread M 12x1.5 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 315 bar in the light series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.

Applications

Where space at the device is tight, tube 8 L (M14x1,5) is guided past the wall through the swivel bend of the light series.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.