Non-restricting swivel elbow, M 18x1.5, tube 12 S, zinc-plated steel, no nut or ring

This swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The article is listed with a working pressure of 400 bar. This version is listed with male stud thread M 18x1.5 and tube connection 12 S (M20x1.5). The stated material is zinc-plated steel. This version is supplied with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 12 S (M20x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 12 S (M20x1,5) is kept right through the swivel bend.
• Male stud thread M 18x1.5 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

In machine building the non-restricting version in zinc-plated steel replaces the bend that would otherwise be needed and holds 400 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.