Non-restricting swivel elbow, M 18x1.5, tube 15 L, zinc-plated steel, no nut or ring

Once installed, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. In addition the sheet lists a temperature range of -40 to +120 °C. The stated figure is a working pressure of 315 bar. The version is listed with light series and scope of delivery without nut and cutting ring.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 15 L (M22x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 15 L (M22x1,5) is kept right through the swivel bend.
• Male stud thread M 18x1.5 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 315 bar in the light series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

In machine building the non-restricting version in zinc-plated steel replaces the bend that would otherwise be needed and holds 315 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.